Description

2007 Used Casagrande C6 Fully operational and extremely well maintained micropile/anchor drill rig.

This machine was fully serviced and reconditioned with less than 50 hours of use, all factory Casagrande parts and seal kits. All functions work and there are zero leaks and no rust. Owner operated and always stored in warehouse. Ready for work and needs nothing. Serious offers only.

Additional high-resolution photos and videos available upon request. Free trucking to the port of Honolulu included.

Machine options:
– Rotary head with top hammer percussion, T1200 6V, with Thyssen Krupp HBS30 hammer
– Three speed head with high and low torque. Max torque, 13,550 Nm, max rotation 550 rpm
– M2Z/M2SZ double clamp with breaker, 145 Kn force, 254 mm opening
– Jet grout kit
– Set up for micropile grout injection hollow bar (and/or) DTH Down The Hole hammer drilling with casing
– Engine, Deutz BF4M – Mast travel is 4,000mm (13.1 ft), 63.5 Kn extraction force
– Drill head side shift function
– Machine weight, 13.5 T

Notable servicing’s include:
– All hydraulic rams have been serviced and all seals replaced (<50 hrs)
– Clamps fully reconditioned, all wear parts replaced, jaws, jaw holders, etc.. (0 hrs)
– Drill motor and hammer have been fully reconditioned. All wear parts replaced, and all new fluids (0 hrs)
– New electrical wiring and harness from controls to drill motor (<50 hrs)
– New striker bar (0 hrs)
– New batteries (<50 hrs)
– Fuel injectors rebuilt and tested (<100 hrs)
– Professional cleaning meeting trucking and ocean freight requirements