Used Drilling Rigs for Sale

Compare methods, and choose the most cost effective solution and application. The end-to-end platform for geotechnical engineers and foundation specialists.

Rapidly iterate design alternatives to reach the optimal solution.

Ultimate solution for Pile Foundations and Deep Excavatoon and Soil Investigations.

CloudPiling was specifically developed for geotechnical engineers at foundation companies who aim to design the most cost-effective deep excavations in the shortest possible time.

Our SaaS platform offers a powerful calculation engine that integrates all design aspects, allowing you to quickly and efficiently achieve the most optimal result. No programming required. Once you purchase a license, you can start working immediately and earn back your investment quickly.

PTC BFS18-R13 with tank.

Specs from internet:

PTC Vibrolance BFS18 (Bottom-Feed System) Specifications
	•	Standard Soil Treatment Depth: 6 m
	•	Maximum Treatment Depth (with extensions): 17.5 m
	•	Stone Column Diameter: 450 – 800 mm
	•	Hydraulic Power: 113 kW (154 HP)
	•	Hydraulic Flow: 190 L/min
	•	Operational Frequency: 50 Hz / 3000 rpm
	•	Centrifugal Force: 181 kN
	•	Eccentric Moment: 1.8 m·kg
	•	Air Jetting System: Optional
	•	Recommended Power Pack: Model 240

IMT AF 130 Piling Rig For Sale
Year: 2007
Hours: 9731
Chasis: CAT 324.
Torque: 130 KNm
Max Depth: 48 m
Max Dia: 1500 mm
​

Soilmec SR 30 for sale
year 2014
Hours: 20000
Kelly Bar: Interlocking 36 m

Crane Attachment Soilmec RTC-S For sale
Year: 1979
Hours: 6500
Torque: 120 KNm
Equipment ready to work

Used Tubex TBX45 machibe for sale
TBX 45 Tubex pile machine.

This powerful rig is 2016 year and has 1157 hours.

We have all jaw sizes from 12 inch to 20 inch,

Used SOILMEC SR50
Year: 2009
Hours: 7100
CFA and Kelly kit
Beautiful good working machine

Used Bauer BK28 Kelly Bar for sale. In very decent condition, one minor welding repair done by certified CWB welder.
Price is negotiable.

Used Casagrande B125 drill
Year: 2009
Hours: 3500
Set up for micropile drilling
The drill is suited for DTH hammer drilling, currently installing 711 OD steel casing with ODEX type system.
Includes 14'' DTH hammer and shock absorber as well as 460 mm Rock Bit.
Also includes lots of spare components - see additional photos.

Had to replace perfectly working parts on a rental of an LB28 because of small dent on Cooler and Screen. Reason was that the rig was brand new.
Please make a reasonable offer, very open to negotiations on these parts!
• #11264667 Screen
• #11252062 Oil Cooler
*The Screen is compatible with an LB36
*The Cooler is compatible with an LB36 tier 4 final and LB44 interim and final

Completely overhauled Koehring 1066D Excavator. Rebuilt engine, changed airlines, full body work and paint.
This excavator is specialised for slurry trenching and/or deep excavations.
Standard and Long Reach sticks are included as well as different size buckets.

Used RTG23 rig
Year: 2006
Hours: 8495
CAT engine rebuilt at 7,224 hours (November 21, 2016)  Eng. SN WJH00705
Base Carrier BS 70
Undercarriage UW 95R
KDK227S Rotary – Rebuilt in February 2018
This piece of equipment is setup for BCM5 and CFA work.
It does not have a Kelly winch for using a Kelly bar.

BCM5 Cutter Package
BCM5 cutter head with water box, drive motors and two newly rebuilt gearboxes that have never been used.
16.5m of mono Kelly for the BCM5 cutter (NOT AVAILABLE) 
One new rebuilt gearbox purchased from Bauer and never used.
Two 24” (610mm) Bauer cutter wheel sets used in fair condition
Two 30” (762mm) Bauer cutter wheel sets used in fair condition
BCM5 Spare Parts – Needs to be firmed up
Two new ring and pinions for the right angle drive along with bearings
Snap ring, collars and shims for preloading
3-4 dual cone seals
1 hollow shaft
Bearings for one planetary head about 16 bearings
1 to 2 planetary setups – spiders and bearings, not sure about gears
1 spacer column that fits between the cover and hollow shaft
Misc. bolts and fasteners

RockTec Intelligent Technology(YangZhou) Co., Ltd is invested and holded 50% of subsidiaries by Hunan Unicorn Machinery Co., Ltd. 
It is a high-tech enterprise integrating design, production and sales of construction machinery and its supporting equipment into a whole. 
Main products of the company include: RT80, RT120, RT150, RT180 model rotary drilling rigs,
 the rotary head used for the rotary drilling rig, the continuous wall power head, the rotary head of the torque rise devise, 
the positive and reverse circulation drilling rig of the automatic connecting rod, the kelly bar, the swivel, upper and lower frames, customized engineering machinery supporting products; 
and the products overhaul and parts replacement and other services can be provided according to customer's requirements and our technologies.
RockTec brand drilling rigs have been working for many well-known engineering projects in China and abroad. 
The rotary heads match for Sany, XCMG, Zoomlion, SUNWARD, YUTONG CHTC JOVE, Soilmec, IMT etc domestic and foreign brand rigs.

good condition,year 2008

Brand new Liebherr LB25 for sale
0hrs LB 25 Drill Rig with Warranty Including BAT 250 , Includes Kelly Bar, Includes  3 sets of 15m/49'2" Casing (24")
Includes Buckets, 520 MM (20") cleanout Bucket with 200 MM Box manual Opening.  520 mm (20") rock drilling bucket  with 20 MM box Manual opening.  40 additional Teeth.