Used Drilling Rigs for Sale

DPM50/80 Rod + Casing grappler
Demo unit

Description: Used JCB Pilemaster drill
Hours 1086 , 2020 year
Ready to work.

Used HPSI H35VT Rotary Head and Power Pack
In excellent condition.
Major overhaul done by the factory recently.

Description: Used CZM EK200
Used CZM drill rig now available for sale. 
YOM: 2015
Hours: 5800

Bauer BG 18H
Year: 2000
Torque: 180 KNm
Engine: CAT 3126 DITA
Chasis:  CAT 330
Equipment ready to work
Kelly Bar: 36 m interloking

Used CZM EK90M drill
Year 2020
Hours: 1200

Used Soilmec SR65
2011 Soilmec SR 65 (4 x 9.5m kelly bar)
with spare parts (7900 hrs)

Description: Used Tescar CF6 Plus
Includes CFA kit
Year: 2018
400 Hours

Description: Used Casagrande B175XP in USA Low hours B175 drill rig is now ready for sale.
Year: 2015
Hours: 2500
Kelly Bar setup with max 1500 mm borehole dia. Predispositions for CFA setup as well as KRC1 Diaphragm Wall  equipment until 800 mm trench wide adn 29 M depth.

Description: Used Liebherr LB44 for sale
Hours: 7500
BAT 510 is updated to 559 driver and MD 45/3/36 kelly bar.

Description:
Drill torque - 35,000 ft-lbs
Drill depth – Max 40’(tooling on hand)
Drill diameter – 610mm (tooling on hand)
Included in the package:
 BRC35 Rotary
 Upper Swivel Slide Assembly 3-axis
 Lower Torque Resistant Swivel Slide Assembly
 25” Gate
 Parts / Operators Manual
 Joystick Control
 6 pcs of 6" x 20' Hard/Wired Discharge Hose Assembly
 25” Gate with Gibs
 610/10MM N180 Pilot Bit
 7 pcs of 609.9/19MM Ring Bit
 N180 18" 240 Hex Hammer
 18" 240 Hex Pin x Box Shock Su (includes Hex for Shroud)
 13-5/8" X 6-1/4" X 20' SS - 9.4" Hex Pin X Box - 13-5/8" OD x 0.565 W RC
Pipe
 Interchange 24" X .750 Wall CA - 9.4 Hex Pin X 240MM Hex Box
 Air Manifold system
 Air oiler system

Used Bauer BG11
Meticulously maintained, low hours and Tier 4 interim.
Two Kelly bars, 1-75’ and 1-40’ drill depth.
Special ordered to match up with a BG15 Kelly and drive system.
Will out perform any competitor equal to its size.

The GEAX EK90 is a
multi-purpose piling rig
designed to achieve the
highest levels of
versatility,
manoeuvrability, ease of
use, transportation,
production and reliability.
It is configured to operate
in various different piling
modes.
For each drilling mode a
special kit is designed to
optimize the
performances. However,
the modularity
of the components makes
the conversion among
the different kits
extremely easy, fast and
low-cost.
The GEAX EK90’s outstanding
production capability is
comparable to machines of a
much larger size. Its excellent
stability allows easy
manoeuvrability on job sites and
ensures fast and safe operating
movements. Its compactness
and low weight allows easy
transportation without special
permits.
The Hitachi Zaxis 160 or JCB
JS160 base carrier, constructed
to GEAX specifications, ensures
excellent reliability and
maintenance with operator cabin
comfort not available on
proprietary machines
The GEAX EK90 (in common with
other GEAX machines) has an
articulation structure similar to a
normal excavator with a long
boom supporting the mast. This
allows a wide range of mast
positioning and independent
adjustment of the vertical
position of the mast. Wire rope
positions are not dependent on
the position of the mast as the
winches are mounted on the
mast itself. This design,
compared to other machines,
usually with parallelogram type
mast supports, ensures the
following:
• Excellent rigidity and lightness
• More precise movements
• Fast setup time
• Wide range of tool positioning
• Simpler maintenance
• Better visibility for the operator

Rod and Casing grapplers:
Piling Broker provides a full range of high quality and robust grapplers either for casing only or rod and casing.
Various diameters can be lifted only inserts are changing.
Fully remote controlled, grapplers can turn 360 degrees.
Good track record in USA and Canada as well as Europe proves the quality of those deivices.

C/W water reservoir,  40,000 ftlbs torque,  6" &   4-1/4"   Kelly bars,  slot pin, 
Recent Repairs:  new track chains, numerous hoses, teflon slides, kelly brake, crowd cylinder rebuild, engine controller complete with all new engine wiring harness.

SOILMEC SR 90 FOR SALE
Year: 2008
Hours: 3082
Engine: Deutz TCD 2015 V08, 400 Kw
Torque: 333 KNm
Included
*Kelly Bar:  4 X 13,5m y 4 x 17,5
*Kit CFA complete
​
​
Ready to work