Used Vibratory Hammers for Sale

Antaeus Model 200s Sheet Clamps.
Quantity Available: 10

Description: Used Movax SG75V
Very good shape, year 2018 and it did not work much.
SG 75V has the MCS Pro controls
It can be offered with 349FL (year 2018) that has all the controls installed.

This 1200inlb vibratory hammer was used on a couple jobs and has less than 500 hours on it.  This excavator mount unit came off a 30ton excavator and its pressure settings are self regulated so as long as there is enough flow there are no complicated frequency adjustments necessary.
All offers considered.  Direct shipping available.

Used Side Grip SP-100 vibro
It’s a 2009, estimated hours are 375-hours.

Controller pendant for a APE 150 pile driver. New never used. 14 pin.

Description: Used PVE 24 VM vibro
Hours: 2100
Includes Vibro, Power Pack and Sheet clamp (plus set of hoses)

Description: 2015 ABI HVR85

Description: 2014  ABI HVR 85 Z vibro

Description: Used APE 150 Vibratory Pile Hammer.
Unit is tested and ready to operate

Make: Dawson
Model: EMV 300A
Year: 2006
Weight: 1162 KG
Required excavator: 12-35 ton
Centrifugal Force: 67,240 lbs.F

Used Vibration Dampener for crane protection against vibro hammer impact
Used only on one rental

Used 2011 Caterpillar LCR328
Complete package with Robovibe fitted 26T
Quickhitch
Aux lines
10,900 Hours
Just after full service and ready for work

Crane Vibration Dampener
Uses only once.
85 T shackle
Premium Quality
More details:
Frequently Asked Questions: 
Q: What vibratory hammers do these work on? Up to what size? 
A: The No-Shock will dampen up to 45 tons (90,000 lbs) of hanging weight.  Therefore it will work on any size vibratory driver/extractor as long as the overall hanging weight does not exceed 45 tons.   Max line pull it can handle is 175 US tons.
Q:  Tunkers and ICE dampeners are a lot lighter in weight, why is the no-shock so heavy? 
A:  The 4,300 lbs of the no-shock compared to 1,800 lbs or so of the competition is by design.  The extra weight allows for effective dampening of startup and shutdown, it takes the shock so your crane does not.  If the dampener is too light it won’t dampen as effectively and the boom of the crane will take the hit.   
Q:  Can we rent the No-Shock? 
A:  Yes, call for a quote in your area.  
Q:  How long will it last? 
A:  This machine will go at least 5 years without any need to maintain it other than periodically checking that the Ballast weight bolts are still tight.  Competitive machines have many pins and wire ropes that can wear, break, or fall off, whereas the no-shock device is solid steel and essentially has no wear items other than the rubber elastomers that typically have a 5-10 year life.  
Q:  Can this go underwater? 
A:   Yes, the rubber elastomers we are using is Generation 5, meaning the chemical locking we are using on the elastomer is designed to go in the ocean for long durations without any impact.  
Q:  How do I rig it to my vibro? 
A:  We have a rigging team that can help you, typically they are rigged to the hammer with a braided wire rope and remain connected to the Vibro for the duration of the job.