Used Berminghammer BRC 35 System
The Used Berminghammer BRC 35 System is a drilling rig, listed on Piling Broker. It is located in Canada, and the asking price is CA$387,000.01.
Description
Description: Drill torque - 35,000 ft-lbs Drill depth – Max 40’(tooling on hand) Drill diameter – 610mm (tooling on hand) Included in the package: BRC35 Rotary Upper Swivel Slide Assembly 3-axis Lower Torque Resistant Swivel Slide Assembly 25” Gate Parts / Operators Manual Joystick Control 6 pcs of 6" x 20' Hard/Wired Discharge Hose Assembly 25” Gate with Gibs 610/10MM N180 Pilot Bit 7 pcs of 609.9/19MM Ring Bit N180 18" 240 Hex Hammer 18" 240 Hex Pin x Box Shock Su (includes Hex for Shroud) 13-5/8" X 6-1/4" X 20' SS - 9.4" Hex Pin X Box - 13-5/8" OD x 0.565 W RC Pipe Interchange 24" X .750 Wall CA - 9.4 Hex Pin X 240MM Hex Box Air Manifold system Air oiler system
Used Berminghammer BRC 35 System
CA$387,000
Price
CA$387,000
Send Message to the Seller
Money Back Guaranteed
You can test this machine for 5 days (or 25 hours) with a 100% Money-Back Guarantee!
Get in Touch with Seller
Similar Products
See AllBV-30V Premium Line - 2013
$590,000 USD
2013 BAUER BV-30V Premium Line drilling rig, with 14,000 hours (significant idling), is meticulously maintained and primed for immediate deployment. Key components, including main hydraulic pumps and rotary motors, have been rebuilt or replaced, ensuring peak operational efficiency. Fully serviced with all electronics functioning perfectly -Main Hydraulic pumps rebuilt, flow and pressure tests that have just been done can be provided -All pilot pumps rebuilt or replaced -Rotary motors replaced -419/3/36 kelly bar LOTS OF IDLE HOURS Ignition operation: 14,019:30 hours Engine time: 13,784:00 hours Slow crowd operation: 2,550:26 hours Fast crowd operation: 323:20 hours KDK operation: 3,458:31 hours Winch 1 operation: 1,622:31 hours Winch 2 operation: 162:12 hours
BAUER
•
Drilling Rigs
•
14000 HR
•
2013
BAUER
Drilling Rigs
14000 HR
2013
36" BAUER CASINGS & ACCESSORIES - 2008
Contact
USED 36“ BAUER CASINGS & ACCESSORIES YR 2008 36"" Single Wall Segmental Casing (Threaded female adapters on each piece of casing with hex male threaded bolts, connects them together) 36"" OD (outside diameter) 32"" ID (Inside diameter) 7 count 10' sections 2 count 10' starter pieces (with cutting teeth. Note picture named ""36in-ID Measure"") 2 count 5' section 1 count drive adapter unit (bolts to machine under KDK) 5 casing transportation racks (makes easy loading onto truck with forks) 1 casing vise The casing transportation racks makes handling the casing easy during the loading phase.
BAUER
•
Drilling Rigs
•
1000 HR
•
2008
BAUER
Drilling Rigs
1000 HR
2008
Wirth PBA 818 Reverse Circulating Drilling Rig - 2011
Contact
Reverse Circulating WIRTH PBA 818 & ACCESSORIES. This unit includes a WIRTH PBA 818 with POWER PACK HPIV. Also comes with 2x 1270 MM bits and 1x 1000MM bit. A comprehensive list of accessories is included: 6x Drill Collars, 4x BHA Stabilizers, 4x Stabilizers, 2x Crossover Subs, 22x Drilling Rods with Racks, 1x Under Reamer, 2x Stingers, 1x Wirth Bit Diam. 1000MM, 3x Wirth Bit Diam. 1270MM (one with Stinger Plate), 1x Center Bit Plate for Stinger, 1x Center Bit Plate, 1x Lifting Cap, 1x PBA818 Complete Mast/Rotary S/N 52, 1x Drilling Platform and 2MT Casing Clamp, 1x Goose Neck, 1x Drill Rod Chute, 1x Crane, 2x Casing Adaptors 2000/1400 (2 half), 1x Control Cabin, 1x Control Panel, 1x Hand Rails, 1x Power Pack HPIV S/N 48.
Wirth
•
Drilling Rigs
•
8200 HR
•
2011
Wirth
Drilling Rigs
8200 HR
2011