2013 BAUER BV-30V Premium Line drilling rig, with 14,000 hours (significant idling), is meticulously maintained and primed for immediate deployment. Key components, including main hydraulic pumps and rotary motors, have been rebuilt or replaced, ensuring peak operational efficiency. Fully serviced with all electronics functioning perfectly
-Main Hydraulic pumps rebuilt, flow and pressure tests that have just been done can be provided
-All pilot pumps rebuilt or replaced
-Rotary motors replaced
-419/3/36 kelly bar

LOTS OF IDLE HOURS
Ignition operation: 14,019:30 hours
Engine time: 13,784:00 hours
Slow crowd operation: 2,550:26 hours
Fast crowd operation: 323:20 hours
KDK operation: 3,458:31 hours
Winch 1 operation: 1,622:31 hours
Winch 2 operation: 162:12 hours

USED 36“ BAUER CASINGS & ACCESSORIES
YR 2008

 36"" Single Wall Segmental Casing (Threaded female adapters on each piece of casing with hex male threaded bolts, connects them together)

36"" OD  (outside diameter)
32"" ID (Inside diameter)
7 count 10' sections
2 count 10' starter pieces (with cutting teeth. Note picture named ""36in-ID Measure"")
2 count 5' section
 

1 count drive adapter unit (bolts to machine under KDK)
 

5 casing transportation racks (makes easy loading onto truck with forks)
 

1 casing vise
 
The casing transportation racks makes handling the casing easy during the loading phase.

Reverse Circulating WIRTH PBA 818 & ACCESSORIES. This unit includes a WIRTH PBA 818 with POWER PACK HPIV. Also comes with 2x 1270 MM bits and 1x 1000MM bit. A comprehensive list of accessories is included: 6x Drill Collars, 4x BHA Stabilizers, 4x Stabilizers, 2x Crossover Subs, 22x Drilling Rods with Racks, 1x Under Reamer, 2x Stingers, 1x Wirth Bit Diam. 1000MM, 3x Wirth Bit Diam. 1270MM (one with Stinger Plate), 1x Center Bit Plate for Stinger, 1x Center Bit Plate, 1x Lifting Cap, 1x PBA818 Complete Mast/Rotary S/N 52, 1x Drilling Platform and 2MT Casing Clamp, 1x Goose Neck, 1x Drill Rod Chute, 1x Crane, 2x Casing Adaptors 2000/1400 (2 half), 1x Control Cabin, 1x Control Panel, 1x Hand Rails, 1x Power Pack HPIV S/N 48.