Used Casing & Tooling for Sale
Used Casing & Tooling for sale. Piling Broker connects contractors and dealers buying and selling used Casing & Tooling worldwide.
Sort by
Can't find the machine you need?
Tell us what you are looking for and we will put the word out across our network of dealers and contractors.
Contact us
Roller bit is the ideal tool for hard rock drilling, especially high UCS and RQD, UCS above 100Mpa, which normal core barrel with bullet tooth, hard to get production. The drilling cost per meter is high. Firmtech provides one -stop solution for rock drilling. provide 4 type roller bit for selection and give proper welding instruction to ensure the precise position and get ideal drilling performance. furthermore, Firmtech gives the design of core barrel which can ensure drilling efficiency.
China
Casing & Tooling by brand
- ABI Casing & Tooling
- ATLAS COPCO Casing & Tooling
- Bauer Casing & Tooling
- Berminghammer Casing & Tooling
- Center Rock Casing & Tooling
- HEMCO Casing & Tooling
- Jeffrey machine Casing & Tooling
- Kalicson Casing & Tooling
- Leffer Casing & Tooling
- Mori Casing & Tooling
- N/A Casing & Tooling
- NUMA Casing & Tooling
- Olivier Casing & Tooling
- OTHER Casing & Tooling
- SIP&T Casing & Tooling
- TOPDRILL Casing & Tooling
- Bauer 24
- Bauer 52M
- Bauer 880
- Bauer Hydraulic Pipe Guide
- Bauer Various
- Berminghammer Various sizes
- HEMCO 1200/1120
- HEMCO 1500/1400
- Jeffrey machine 24
- Kalicson LR-1600 spherical grab
- Leffer 1200 mm
- Leffer 1200/1120 mm
- Leffer 1300/1220 mm
- Leffer 1500/1420 mm
- Leffer 620 mm to 1500 mm
- Leffer 620/540 mm
- Leffer 750/670 mm
- Leffer 880/800 mm
- Leffer LGK1-118
- Mori HEB350 RT
- N/A 880-800
- NUMA RC300
- Olivier Drill string
- OTHER MH-3
- SIP&T 1300
- SIP&T 3000 mm
- TOPDRILL N240 Shank
Casing and tooling covers the wearing parts of foundation drilling: casing tubes and joints, augers, drilling buckets, core barrels, cutting teeth and kelly bars. These are bought and sold separately from the rigs they run on, and turn over far more often.
Fit is what matters. Diameter, joint or connection type and compatibility with your rig or oscillator decide whether a piece of tooling is usable at all, so confirm the interface before buying.
Frequently asked questions
Is drilling tooling interchangeable between rigs?
Not reliably. Connections, diameters and casing joint types vary between manufacturers, and a piece that fits one machine may not fit another. Always confirm the connection type and dimensions against your own equipment.
What should I check on used casing?
Look at the condition of the joints and the cutting shoe, check for ovality or damage from previous extraction, and confirm that wall thickness and diameter match the rest of your string.