Used Cranes & Diaphragm Wall Equipment for Sale
Used Cranes & Diaphragm Wall Equipment for sale. Piling Broker offers a wide range of used Cranes & Diaphragm Wall Equipment for sale, including some of the leading brands such as used LIEBHERR, Kobelco, LINK BELT, Bateman, CASAGRANDE, Fuchs, Manitowoc and PEINER and more.
Sort by
Can't find the machine you need?
Tell us what you are looking for and we will put the word out across our network of dealers and contractors.
Contact us
Description: Used Liebherr HS883 crane This crane was fully refurbished in 2015 and it is in excellent working condition. Rebuilt fully at 14658 hours. Hours since rebuilt: 7059 Literally all was replaced (engine, hydraulic pumps, hydraulic motors, Zollern winches, track final drives, undercarriage, wiring harness and paint). Operating cost of this crane will be less than newer not refurbished HS883 and new owner can get another 20 years out of it.
United States
Bateman 12 YD Clamshell Bucket. Brand new, never used, automated bucket with engine.
United States
Engine Deutz TCD2015 S/N 9176425 Kelly bar KRC2-33-180 14800 mm – Max depth = 45.480 m Grab model Casagrande grab K2500 HD S/N KRC2UU0367 Like new comes with Grab model (1) Casagrande grab K2500 HD S/N KUDO399 Depth – 762 mm Width (open) - 2500 mm Height (closed) – 3200 mm Grab model (2) Casagrande grab K3000 HD S/N - to be confirmed Depth – 609.6 mm Width (open) - 3000 mm Height (closed) – 3700 mm Grab model (3) Casagrande grab K3000 HD S/N – SKZU259 Depth – 609.6 mm Width (open)) - 3000 mm Height (closed) – 3700 mm Grab model (4) Casagrande grab K2500 HD S/N – KUU0367 Depth – 609.6 mm Width (open) - 2500 mm Height (CLOSED) – 3200 mm
Canada
USED LIEBHERR HS 853 HD LITRONIC FOR SALE Year: 2000 Hours: 8315 Capacity: 80 tons Winches: 2x20 tons con caida Libre READY TO WORK
Spain
This category covers duty-cycle and crawler cranes used as base machines on foundation sites, together with the equipment they carry for diaphragm walling — mechanical and hydraulic grabs, and hydromills for harder ground.
Duty-cycle cranes are built for continuous, repetitive line pull rather than occasional lifting, which is what grab and casing work demands. Line pull, winch capacity and suitability for continuous duty matter more here than a lifting chart alone.
Frequently asked questions
What is a duty-cycle crane?
A crawler crane built for continuous winching rather than occasional lifts. Its winches, cooling and structure are designed for the repetitive, high-cycle work of grabbing, casing and dynamic compaction, which a standard lifting crane is not.
Should I use a grab or a hydromill for a diaphragm wall?
Grabs are simpler and cheaper to run, and suit soils and soft rock. Hydromills cut harder rock, reach greater depths and hold tighter verticality, at higher cost. The ground and the required depth usually make the decision.
What should I check when buying a used duty-cycle crane?
Ask for the structural inspection history and the load chart, and check the wire rope and winches, since these carry the repetitive loading this class of crane is built for. Confirm the operating hours and whether it has a current certification for the work you plan to use it for.