Discover Used Foundation Equipment

USED 36“ BAUER CASINGS & ACCESSORIES
YR 2008

 36"" Single Wall Segmental Casing (Threaded female adapters on each piece of casing with hex male threaded bolts, connects them together)

36"" OD  (outside diameter)
32"" ID (Inside diameter)
7 count 10' sections
2 count 10' starter pieces (with cutting teeth. Note picture named ""36in-ID Measure"")
2 count 5' section
 

1 count drive adapter unit (bolts to machine under KDK)
 

5 casing transportation racks (makes easy loading onto truck with forks)
 

1 casing vise
 
The casing transportation racks makes handling the casing easy during the loading phase.

This 2018 LEFFER VRM 250 KL Casing Oscillator is available with exceptionally low hours, just 1000 since new. A reliable solution for deep foundation projects, this unit previously operated with a Bauer BG 42. Please note, it is offered without a power pack or reduction inserts, presenting a cost-effective opportunity to integrate into your existing equipment fleet.

Reverse Circulating WIRTH PBA 818 & ACCESSORIES. This unit includes a WIRTH PBA 818 with POWER PACK HPIV. Also comes with 2x 1270 MM bits and 1x 1000MM bit. A comprehensive list of accessories is included: 6x Drill Collars, 4x BHA Stabilizers, 4x Stabilizers, 2x Crossover Subs, 22x Drilling Rods with Racks, 1x Under Reamer, 2x Stingers, 1x Wirth Bit Diam. 1000MM, 3x Wirth Bit Diam. 1270MM (one with Stinger Plate), 1x Center Bit Plate for Stinger, 1x Center Bit Plate, 1x Lifting Cap, 1x PBA818 Complete Mast/Rotary S/N 52, 1x Drilling Platform and 2MT Casing Clamp, 1x Goose Neck, 1x Drill Rod Chute, 1x Crane, 2x Casing Adaptors 2000/1400 (2 half), 1x Control Cabin, 1x Control Panel, 1x Hand Rails, 1x Power Pack HPIV S/N 48.

Belgrade 2024 Portable,200 BBL, LoProfile Cement Silo available for sale, surplus to their present needs.
Legal 8’6 wide x legal 13’-6 tall, 26’-0 overall length, 8” x 17’ discharge screw, 8” x 5’ auger

extension, 5 HP three phase motor and gear box drive, manual slide gate assembly, solimar vibratory discs, manifold assembly with airline

and fittings, filter/regulator and (3) manual controls, (1) 10,000# axle with electric brakes and lights, manhole with pop off valve, (4)
leveling jacks, 330 sq. ft. pulse jet dust collector, pop off valve, 10 ¾” x 4’ vinyl boot sock with clamp,

Fits 5t-25t Excavators
Currently set up for 5t
Radio Remote Controlled
10ft Stroke
Very Little Use
Great Condition
Full Working Order

Complete Mercedes Arocs 8X4 with AMV computerized crouting system. Palfinger crane

Sennebogen piledriver for sale, ready for delivery.
Machine can be delivered to any harbor in Sweden at self cost.
No hammer included

This 2019 Casagrande C12 XP double rotary drill rig, with only 2900 hours, is in excellent condition and ready for immediate deployment. Designed for high performance and reliability, it's an ideal solution for demanding foundation and piling projects, offering precision and efficiency.

Multidirectional drilling rig from 90 degrees to 15 degrees. Features include wireless remote control, winch, washing pump, rotopercussion, double head, extraction cylinder, LED lighting, electric inclinometer, and welder. Powered by a Caterpillar C7.1 Acert engine.

Liebherr LB24-270 drilling rig. High performance, good condition. Using BAT270 drill drive. Already located in USA, save the import duties. Equipped for Kelly Drilling, CFA and FDP. Complete with MD28/3/24 - 24m kelly bar. Date recording system from Jean Lutz. Now available. Will ship to you throughout North America.

Heavy duty hose pump for slurry pumping. Frequency drive for variable speed and control. Flow rate 25 - 75 m3/hr.
Low shear factor, so slurry polymers remain intact. Can handle solids to 3/4". 
Small size and quiet operation to benefit your construction sites.
Available for sale or rental. Call FDS today !

Liebherr LB28 - 320 complete with BAT320 drill drive and MD28/3/27 kelly bar.
Equipped with extended leader with 1m section AND folding leader section.
Well maintained and reliable machine. Most recent maintenance done by Liebherr Canada.

Available now, this 2021 Comacchio CHF 500 drilling rig boasts just 2900 hours, making it an excellent choice for CFA piling operations. Equipped with a variable gauge undercarriage, powerful Cummins engine, CR 15 rotary head, 5-inch concrete line, and 21m single pass capability, it delivers high performance. This well-maintained unit is ready for immediate deployment; please note it is offered without CE certification.
YR  2021

OPERATING HOURS Approx 2,900

5inch concrete line

Winch (not jack)

21m single pass

WITHOUT / OHNE CE

KCP concrete pump, never used 2026, 0 hours

Model KTP1160-8 
Maximum Output 78m³/h (102yd³/h) 
38 strokes per minute
Concrete Pressure 70bar (1,015psi)

This brand-new, never-used 48’ kelly extension is complete with a monkey pole, swivel, and insert. Versatile and designed for broad compatibility with most drilling rigs, this 2025 model is immediately available to enhance your piling and foundation operations.

HYDRAULIC CRAWLER MOUNTED DRILL RIG GEO 909 GT.

INCLUDES TOOLING: 

DRILL ROD D.88,9 W.T.6,3 mm. M/F N. 140 273,70 38.318,00 02"3/8 IF L=2000
Casing 152 mm triple start LH Klemm Thread L=125mm
2 meter rods – 64 pieces
Basic unit features: Track carriage (max width 2.400 mm, pad width 500 mm), Chassis, Standard articulation (mast tilt, mast slide), Mast (Feed stroke 5.200 mm, total length 9.680 mm), Carriage for double head RH3200 & R900, Hydraulic setting for double head, Double head kit RH3200 & R900 (Upper head R900C, Lower head R3200-172), Swivel CTA30, Preventer for double head kit, Clamp assembly (nr. 1 breaker clamp, clamping range 85-200mm self-centering clamp for casing), Rods and casing carousel (patented system, capacity n°64),