Home
Marketplace
Drilling Rigs

Used Drilling Rigs for Sale

Used Drilling Rigs for sale. Piling Broker connects contractors and dealers buying and selling used Drilling Rigs worldwide.

1 Products

Sort by

Relevance
Used Berminghammer BRC 35 System
Used Berminghammer BRC 35 System image
USED
$283,416 USD
Description:
Drill torque - 35,000 ft-lbs
Drill depth – Max 40’(tooling on hand)
Drill diameter – 610mm (tooling on hand)
Included in the package:
 BRC35 Rotary
 Upper Swivel Slide Assembly 3-axis
 Lower Torque Resistant Swivel Slide Assembly
 25” Gate
 Parts / Operators Manual
 Joystick Control
 6 pcs of 6" x 20' Hard/Wired Discharge Hose Assembly
 25” Gate with Gibs
 610/10MM N180 Pilot Bit
 7 pcs of 609.9/19MM Ring Bit
 N180 18" 240 Hex Hammer
 18" 240 Hex Pin x Box Shock Su (includes Hex for Shroud)
 13-5/8" X 6-1/4" X 20' SS - 9.4" Hex Pin X Box - 13-5/8" OD x 0.565 W RC
Pipe
 Interchange 24" X .750 Wall CA - 9.4 Hex Pin X 240MM Hex Box
 Air Manifold system
 Air oiler system

Canada

Berminghammer
Drilling Rigs

How to Buy a Used Foundation Drilling Rig

Drilling Rigs by brand

Foundation drilling rigs bore the shafts for piles, from kelly drilling with augers and buckets through continuous flight auger (CFA) work to displacement and double-head techniques. The rig supplies rotary torque through a kelly bar or drive head, together with the crowd force needed to advance the tool.

Choosing between machines usually comes down to the pile diameter and depth you need to reach, the ground you are working in, and the room available on site. Rotary torque, maximum drilling depth and the type and length of kelly bar are the figures most buyers compare first.

Frequently asked questions

What should I look at first when comparing used drilling rigs?

Start with rotary torque and maximum drilling depth, because together they set the pile diameter and depth the rig can realistically achieve. Then check the kelly bar type and length, the condition of the mast and undercarriage, and the recorded operating hours.

What is the difference between kelly drilling and CFA?

Kelly drilling excavates in stages with an auger or bucket on a telescopic kelly bar, and usually needs casing or support fluid in unstable ground. CFA drills to depth with one continuous auger and pumps concrete through the stem as it is withdrawn, which is faster and quieter but less suited to very deep or large-diameter piles.

Do used drilling rigs come with tooling?

Not always. Augers, buckets, core barrels and kelly bars are frequently sold separately from the rig, so confirm exactly what is included before agreeing a price.