Discover Used Foundation Equipment

Heavy duty hose pump for slurry pumping. Frequency drive for variable speed and control. Flow rate 25 - 75 m3/hr.
Low shear factor, so slurry polymers remain intact. Can handle solids to 3/4". 
Small size and quiet operation to benefit your construction sites.
Available for sale or rental. Call FDS today !

Includes drive plate and grout around knuckle for displacement piles. Jean Lutz screen (10” in-cab screen, flow meter, grout pressure sensor, torque sensor). Fully serviced at Comacchio dealer April 2026. The Comacchio CH650 is a 70-ton, high-torque, self-erecting multipurpose foundation rig capable of Kelly drilling, CFA, displacement piling, soil mixing, and cased pile construction. Its fast mobilization, 225-ft drilling depth, large-diameter capability (up to 8-ft), and flexible configurations make it one of the most versatile deep foundation rigs in its class. High torque and powerful crowd system (up to 193,000 ft-lb rotary torque, up to 74,200 lb pull-up/pull-down force, main winch pull of 56,200 lb).

Two brand new 36 inch (914mm) down the hole bits with N240 Shank
Price is per bit, negotiable.

Compare methods, and choose the most cost effective solution and application. The end-to-end platform for geotechnical engineers and foundation specialists.

Rapidly iterate design alternatives to reach the optimal solution.

Ultimate solution for Pile Foundations and Deep Excavatoon and Soil Investigations.

CloudPiling was specifically developed for geotechnical engineers at foundation companies who aim to design the most cost-effective deep excavations in the shortest possible time.

Our SaaS platform offers a powerful calculation engine that integrates all design aspects, allowing you to quickly and efficiently achieve the most optimal result. No programming required. Once you purchase a license, you can start working immediately and earn back your investment quickly.

PTC BFS18-R13 with tank.

Specs from internet:

PTC Vibrolance BFS18 (Bottom-Feed System) Specifications
	•	Standard Soil Treatment Depth: 6 m
	•	Maximum Treatment Depth (with extensions): 17.5 m
	•	Stone Column Diameter: 450 – 800 mm
	•	Hydraulic Power: 113 kW (154 HP)
	•	Hydraulic Flow: 190 L/min
	•	Operational Frequency: 50 Hz / 3000 rpm
	•	Centrifugal Force: 181 kN
	•	Eccentric Moment: 1.8 m·kg
	•	Air Jetting System: Optional
	•	Recommended Power Pack: Model 240

The HEB 350 RT is a single-clamp hydraulic gripper designed for use with medium to heavy-duty excavators. It offers a powerful and precise gripping mechanism, with robust engineering suited for demanding construction and lifting tasks.

⚙️ Key Specifications:
	•	Model: HEB 350 RT
	•	Clamp Type: Single (Simple)
	•	Opening Range: 140 – 490 mm
	•	Gripping Range: 260 – 460 mm
	•	Lifting Capacity: 6,000 kg
	•	Gripper Weight: 2,500 kg
	•	Recommended Excavator Size: 35 to 49 tons

The DPM 80/120 is a handling device for rods and casing to be installed on an excavator. It has been developed to facilitate the loading/unloading of drilling equipment (Rods, Casing and Augers) on the job site, with great advantages in terms of productivity and safety. The DPM 80/120 is available with a double clamp, with interchangeable diameters inserts, capable to load and unload rods or casing simultaneously.

DPM50/80 Rod + Casing grappler
Demo unit

Crane Vibration Dampener
Uses only once.
85 T shackle
Premium Quality
More details:
Frequently Asked Questions: 
Q: What vibratory hammers do these work on? Up to what size? 
A: The No-Shock will dampen up to 45 tons (90,000 lbs) of hanging weight.  Therefore it will work on any size vibratory driver/extractor as long as the overall hanging weight does not exceed 45 tons.   Max line pull it can handle is 175 US tons.
Q:  Tunkers and ICE dampeners are a lot lighter in weight, why is the no-shock so heavy? 
A:  The 4,300 lbs of the no-shock compared to 1,800 lbs or so of the competition is by design.  The extra weight allows for effective dampening of startup and shutdown, it takes the shock so your crane does not.  If the dampener is too light it won’t dampen as effectively and the boom of the crane will take the hit.   
Q:  Can we rent the No-Shock? 
A:  Yes, call for a quote in your area.  
Q:  How long will it last? 
A:  This machine will go at least 5 years without any need to maintain it other than periodically checking that the Ballast weight bolts are still tight.  Competitive machines have many pins and wire ropes that can wear, break, or fall off, whereas the no-shock device is solid steel and essentially has no wear items other than the rubber elastomers that typically have a 5-10 year life.  
Q:  Can this go underwater? 
A:   Yes, the rubber elastomers we are using is Generation 5, meaning the chemical locking we are using on the elastomer is designed to go in the ocean for long durations without any impact.  
Q:  How do I rig it to my vibro? 
A:  We have a rigging team that can help you, typically they are rigged to the hammer with a braided wire rope and remain connected to the Vibro for the duration of the job.